Avaya G700 Installation And Upgrades page 203

and the S8500 or S8700. The G700 network region may also differ because of the nature of the endpoints
connected to it.
Define IP network regions for the G700 and CLAN board(s)
CAUTION:
Defining IP network regions can be quite complex. For detailed information on the use and
administration of IP network regions, see ''Administration for Network Connectivity for
Avaya Communication Manager, 555-233-504.''
1
On the SAT screen of the primary controller for the G700 Media Gateway, type
network-region <network_region>
to the G700 Media Gateway. This region number may or may not match the network region of the
S8500 or S8700 CLAN boards.
The system displays the IP Network Region screen.
IP Network Region Screen
change ip-network-region 1
Region: 1
Location:
Name:
AUDIO PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3028
DiffServ/TOS PARAMETERS
Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
2
Complete the fields as described in ''Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504.''
NOTE:
It is strongly recommended to use the defaults in the screen.
3
If the network region of the G700 (1 in this example) is different from that of the S8500 or S8700
CLAN board(s), you must interconnect the two regions. Press
Inter Network Region Connection Management.
The system displays page 3 of the IP Network Region screen. This screen shows the source region
(1) and the first 15 destination network region numbers. (Pages 4–19 show destination regions
16–250).
Installation and Upgrades for G700 and S8300
December 2003
, where the <network_region> is the region you will assign
IP NETWORK REGION
Home Domain:
Intra-region IP-IP Direct Audio: yes
Inter-region IP-IP Direct Audio: yes
RTCP MONITOR SERVER PARAMETERS
Keep-Alive Count: 5
Installing a New G700 without an S8300
Administer Communication Manager
Page
IP Audio Hairpinning? y
RTCP Reporting Enabled? n
Use Default Server Parameters? y
AUDIO RESOURCE RESERVATION PARAMETERS
RSVP Enabled? n
NextPage
change ip-
1 of 19
twice to display page 3,
203
4