Install Post-Upgrade Communication Manager Update File From Your Laptop, If Any - Avaya G700 Installation And Upgrades

5
Upgrading an Existing G700 with an S8300 — R1.x to R2.0
Upgrade the S8300
Server Date/Time Window
2
Verify or set the media server's time close enough to the NTS's time, date, and time zone that
synchronization can occur (within about 5 minutes).
Install Post-Upgrade Communication Manager
Update File from Your Laptop, if any
NOTE:
Skip this procedure if there is no Communication Manager update file to install.
Use a telnet session to install the software update.
1
Click Start > Run to open the Run dialog box.
2
Type
3
Log in with the initial
4
Type
5
At the prompt, type
The media server displays a list of files in the FTP directory. Verify that the directory contains the
Communication Manager .tar.gz file you have uploaded, if any.
6
Type
the latest update file. (For example,
7
Type
software file was installed.
244
CAUTION:
The software update may or may not be call-preserving.
telnet 192.11.13.6 and press
ID and password. (You cannot use dadmin at this point.)
craft
cd /var/home/ftp/pub and press
and press
ls -ltr
sudo update_unpack < update>.tar.gz
update_show and press Enter
Enter .
Enter to access the pub directory.
to list files in the pub directory.
Enter
, where < update>
). Press
03.0.219.0-4925.tar.gz
to list Communication Manager files to verify the new
Installation and Upgrades for G700 and S8300
is the release or issue number of
.
Enter
December 2003