Install Post-Upgrade Communication Manager Update File From Your Laptop, If Any - Avaya G700 Installation And Upgrades

6
Upgrading an Existing G700 with an S8300 — R2.0 to R2.x
Upgrade the S8300
Install Post-Upgrade Communication Manager
Update File from Your Laptop, if any
NOTE:
Skip this procedure if there is no Communication Manager update file to install.
Use a telnet session to install the software update.
1
Click Start > Run to open the Run dialog box.
2
Type
3
Log in with the initial
4
Type
5
At the prompt, type
The media server displays a list of files in the FTP directory. Verify that the directory contains the
Communication Manager .tar.gz file you have uploaded, if any.
6
Type
the latest update file. (For example,
7
Type
software file was installed.
8
Type
latest software file. (For example,
the file name). Press
The system may initiate a software reset system 4. You must wait until the restart/reset has
completed before entering additional commands.
If the system displays the message —
message
9
Type
software file was applied.
Install IA770 update (patch) files, if any
If IA770 is being used, a post-upgrade update (patch) for IA770 may be required. See the IA770
documentation for procedures to install an update. The documentation can be found on the Avaya
Support Web Site at http://support.avaya.com. Then click on Product Documentation and then
Messaging and scroll down to the INTUITY document links.
290
CAUTION:
The software update may or may not be call-preserving.
telnet 192.11.13.6 and press
ID and password. (You cannot use dadmin at this point.)
craft
and press
cd /var/home/ftp/pub
and press
ls -ltr
sudo update_unpack < update>.tar.gz
update_show and press Enter
sudo update_activate <update>
.
Enter
.
update_show again and press
Enter .
to access the pub directory.
Enter
to list files in the pub directory.
Enter
, where < update>
). Press
03.0.219.0-4925.tar.gz
to list Communication Manager files to verify the new
, where <update> is the release or issue number of the
03.0.219.0-4925 . Do not use the .tar.gz extension at the end of
/opt/ecs/sbin/drestart 1 4 command failed
Enter to list Communication Manager files to verify the new
Installation and Upgrades for G700 and S8300
is the release or issue number of
.
Enter
— ignore this
December 2003