Avaya G700 Installation And Upgrades page 103

— Opening the Web interface and using the Upgrade Tool
— Or, telnet to the S8300 and then telnet to the P330 stack processor
Direct connection to the remote primary server (S8300, S8500, or S8700)
In this case, the target S8300 is an LSP. If you are at the remote location of the primary server, you can
connect directly to the server's Services port and:
1
Upgrade the S8300 (LSP) software by
— Opening the Web interface and using the Upgrade Tool
2
Upgrade the G700 firmware by
— Opening the Web interface and using the Upgrade Tool
— Or, telnet to the primary server and then telnet to the P330 stack processor and perform the
installation commands
For direct connections, the TFTP server must be on the Customer LAN, not on your laptop.
LAN connections
If you can connect to the customer's LAN, you can:
1
Upgrade the S8300 software by
— Opening the Web interface on the S8300 and using the Avaya Installation Wizard
— Or, Opening the Web interface on the S8300 and using the main menu
2
Upgrade the G700 firmware by
— Opening the Web interface on the primary server and using the Upgrade Tool
— Or, telnet to the P330 stack processor and perform the installation commands
For LAN connections the TFTP server can be your laptop or a customer computer on the LAN.
See "Connection and Login Methods" in Chapter 1 for details on how to connect and log into the G700.
Installation and Upgrades for G700 and S8300
December 2003
Installing a New G700 with an S8300
Installation Overview
3
103