Install New Firmware On The G700 Media Gateway; Firmware Installation Procedures; Install New Firmware On The P330 Stack Processor; Install New Firmware On The G700 Media Gateway Processor - Avaya G700 Installation And Upgrades

Hide thumbs Also See for G700:
Table of Contents

Advertisement

4
Installing a New G700 without an S8300

Install New Firmware on the G700 Media Gateway

Install New Firmware on the G700 Media Gateway
Follow the procedures in this section to install firmware on the G700 processors and media modules.

Firmware Installation Procedures

Install New Firmware on the P330 Stack
Processor
Install P330 stack processor firmware
1
Access the P330 stack processor.
1
At the P330-1(configure)# prompt, type
copy tftp SW_image <file> EW_archive <ew_file> <tftp_server_address> <Module#>
where
<file> is the full-path name for the image file with format and vintage number similar to
viisa3_8_2.exe,
<ew_file> is the full-path name for the embedded web application file with format similar to
p330Tweb.3.8.6.exe,
<tftp_server_ip_address> is the IP address of the TFTP server, and
<Module#> is the number, 1 through 10, of the media gateway in the stack. If there is only one
G700 Media Gateway, the number is
2
To verify that the download was successful when the prompt returns:
3
Type
Install New Firmware on the G700 Media
Gateway Processor
Install MGP firmware
1
At the P330-1(configure)# prompt, type
processor.
2
Type
the prompt to MG-???-1(configure)#.
3
At the MG-???-1(configure)# prompt, type
partition (bank) is in the Active Now column. You will update the bank that is not listed as Active
Now. The system displays the following screen:
194
— type
show image version <module #>
column for Bank B.
— type
dir <module #>
and check the version number in the ver num column for the
EW_Archive file.
reset <module #>
configure
at the MG-???-1(super)# prompt to enter configuration mode, which will change
1
.
and check the version number in the Version
session mgp
to reach the G700 Media Gateway
show mgp bootimage
Installation and Upgrades for G700 and S8300
to determine which disk
December 2003

Advertisement

Table of Contents
loading

This manual is also suitable for:

S8300

Table of Contents