Enable Announcements, If Necessary
1
Only if specifically requested by the customer or your planning documents, at the SAT prompt,
type
enable announcement-board <gateway_number> V9,
number of the G700 Media Gateway you just added and
means Media Gateway number 2, slot V9.
2
Press
E NT ER
The system displays the message Command successfully completed.
Save Communication Manager Translations
Save translations again after all Communication Manager administration is complete.
— At the SAT prompt, type
Complete the Installation Process
Consult the planning documentation to obtain the necessary information to complete the installation. Part
of the final process will be to:
•
Connect and administer test endpoints.
•
Test the endpoints.
•
Complete the electrical installation
•
Enable adjunct systems
This completes the upgrade procedures.
Installation and Upgrades for G700 and S8300
December 2003
to enable announcements.
save translation
Installing a New G700 without an S8300
Complete the Installation Process
where <gateway_number> is the
is the virtual slot (for example,
V9
.
4
2V9
209