Set Telnet Parameters; Remaster Hard Drive And Install The Upgrade Software - Avaya G700 Installation And Upgrades

Set Telnet Parameters

The Microsoft Telnet application may be set to send a carriage return (CR) and line feed (LF) each time
you press
Enter
Telnet to the server.
1
Click Start > Run to open the Run dialog box.
2
Type
telnet
3
Type
unset crlf
4
Type display
5
Close the window by clicking on the X in the upper-right corner.
This resets your Microsoft Telnet defaults and does not need to be done each time you use Telnet.
Remaster Hard Drive and Install the Upgrade
Software
NOTE:
This procedure accesses the information on the CD from the USB CD-ROM drive.
1
Type telnet 192.11.13.6
Tip:
To navigate on these screens, use the arrow keys to move to an option, then press the space
bar to select the option. Press Enter to submit the screen.
Installation and Upgrades for G700 and S8300
December 2003
Upgrading an Existing G700 with an S8300 — R1.x to R2.0
. The installation program sees this as 2 key presses. You need to correct this before you
and press to open a Microsoft Telnet session.
Enter
and press .
Enter
and press Enter to confirm that "Sending only CR" is set.
and press Enter to view the first screen.
5
Upgrade the S8300
233