Associate Lsps With Network Regions - Avaya G700 Installation And Upgrades

IP Network Region Screen
change ip-network-region 1
Region: 1
Location:
Name:
AUDIO PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3028
DiffServ/TOS PARAMETERS
Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
2
If necessary, complete the fields as described in ''Administration for Network Connectivity for
Avaya Communication Manager, 555-233-504.''
NOTE:
It is strongly recommended to use the defaults in the screen. However, for the RTCP
Enabled and RSVP Enabled fields, the entry should be
3
Press
F 3

Associate LSPs with Network Regions

If the primary controller has LSPs, you can associate each LSP with one or more network regions. In the
event of a network failure, IP telephones assigned to a network region will register with an LSP
associated with that region.
This procedure associates up to six LSPs with a network region.
Associate LSPs with a network region
1
On the IP Network Region screen, go to page 2.
IP Network Region Screen, page 3
change ip-network-region 1
LSP NAMES IN PRIORITY ORDER
1 node-10-LSP_____
2 ________________
3 ________________
4 ________________
5 ________________
6 ________________
Installation and Upgrades for G700 and S8300
December 2003
IP NETWORK REGION
Home Domain:
Intra-region IP-IP Direct Audio: yes
Inter-region IP-IP Direct Audio: yes
RTCP MONITOR SERVER PARAMETERS
Keep-Alive Count: 5
( ) to submit the screen.
E NT ER
Installing a New G700 with an S8300
Administer Communication Manager
Page
IP Audio Hairpinning? y
RTCP Reporting Enabled? n
Use Default Server Parameters? y
AUDIO RESOURCE RESERVATION PARAMETERS
RSVP Enabled? n
n (no).
IP NETWORK REGION
1 of 19
Page 2 of 19
153
3