6
Upgrading an Existing G700 with an S8300 — R2.0 to R2.x
Task Summary
Task Summary
Before Going to the Site
•
Get Planning Forms from the Project Manager
•
Get the Serial Number of the G700, if Necessary
•
Check Number of Allocated Ports
•
Check FTP Server for Backing up Data
•
Get Software/Firmware Files
•
Complete the RFA Process (Obtain license and password file)
•
Download Software Update (patch) file to Your Laptop, if Necessary
On-Site Preparation Tasks
If the S8300 is a Primary Controller
•
Pre-Upgrade Tasks — If the Target S8300 is the Primary Controller
•
Get IA770 (AUDIX) Data and Stop IA770 (if IA770 is being used)
S8300 is Either a Primary Controller or LSP
•
Back up recovery system files
•
Install New License and Authentication Files, If Necessary
•
Run Save Translations (Only If New License and/or Authentication Files Installed)
•
Transfer Files from a CD or Laptop
S8300 Upgrade Tasks
•
Install New Software
•
Make the Upgrade Permanent
•
Install Post-Upgrade Communication Manager Update File from Your Laptop, if any
•
Install IA770 update (patch) files, if any
G700 Upgrade Using the Wizards
•
Using the Installation Wizard
•
Using the Upgrade Tool
264
on page 266
on page 266
on page 266
on page 267
on page 267
on page 274
on page 279
on page 282
on page 289
on page 290
on page 291
on page 291
Installation and Upgrades for G700 and S8300
on page 267
on page 269
on page 271
on page 273
on page 276
on page 279
on page 290
December 2003