Avaya G700 Installation And Upgrades page 192

4
Installing a New G700 without an S8300
Prepare to Install Firmware on the G700
Directory List for P300 Processor
M# file
-- ----
1 module-config
1 stack-config
1 EW_Archive
1 Booter_Image
2
Check the version number (ver num) of the EW_Archive file to see if it matches the Release
Letter. If not, you must upgrade the P330 stack processor.
3
Type
The system displays the list of software.
Show Image Version List for P330 Processor
Mod
------
3
3
4
Check the version number of the stack software image file in Band B to see if it matches the your
planning document. If not, you must upgrade the P330 stack processor.
Determine if new firmware is required for the MGP, VoIP Module, and installed media
modules.
1
Type
2
At the MG-001-1(super)# prompt, type
The system displays the list of software.
Show MG List_Config
eyp
3
Refer to the list to check the FW vintage number of the G700. In the TYPE column, find G700,
then check the matching field in the FW VINTAGE column to see if it matches the vintage
number in your planning forms. If not, you must install new firmware on the G700 Media
192
ver num file type
------- ----------
N/A Running Conf
N/A Running Conf
3.8.6 SW Web Image
3.2.5 SW BootImage
show image version
Module-Type
-----------
Avaya G700 Media Gateway
Avaya G700 Media Gateway
session mgp
SLOT TYPE CODE SUFFIX
---- ------ ----- ------
V0 G700 DAF1 A
V1 ICC S8300 A
V2 DCP MM712 A
V3 ANA MM711 A
V4 DS1 MM710 A
file location
-------------
Ram
Ram
NV-Ram
NV-Ram
show mg list_config
HW VINTAGE FW VINTAGE
---------- ----------
00 210(B)
72 00
2 52
2 12
1 54
Installation and Upgrades for G700 and S8300
file description
----------------
Module Configuration
Stack Configuration
WEB Download
Booter Image
Bank Version
---- -------
A 0.0.0
B 3.9.0
VOIP FW
-------
2
N/A
N/A
N/A
N/A
December 2003