Avaya G700 Installation And Upgrades page 122

3
Installing a New G700 with an S8300
Install New Software on the S8300
If the AUDIX installation has not completed, the following warning screen will appear.
2
At the telnet prompt, type
3
At the prompt, type
The S8300 displays a list of files in the FTP directory.
4
Verify that the directory contains the update .tar.gz file you have uploaded, if any.
5
Type
latest update file. (For example,
6
Type
software file was installed.
7
Type
update file. (For example,
name). Press
The S8300 goes through a software reset system 4. The S8300 also may display the message
/opt/ecs/sbin/drestart 1 4 command failed. Ignore this message. You must wait until the
restart/reset has completed before entering additional commands.
The S8300 displays a message that the update was applied.
8
Type
software file was applied.
Install IA770 update (patch) files, if any
If IA770 is being used, a post-upgrade update (patch) for IA770 may be required. See the IA770
documentation for procedures to install an update. The documentation can be found on the Avaya
Support Web Site at http://support.avaya.com. Then click on Product Documentation and then
Messaging and scroll down to the INTUITY document links.
122
CAUTION:
If this warning screen appears, close the telnet session, wait about 5 minutes, and try
again.
cd /var/home/ftp/pub
and press
ls -ltr
update_unpack <update> .tar.gz
00.0.218.4-1003.tar.gz
update_show again and press
, where
update_activate <update>
00.0.218.4-1003
.
Enter
again and press
update_show
and press Enter
to list files in the FTP directory.
Enter
, where < update> is the release or issue number of the
). Press
Enter
Enter to list Communication Manager files to verify the new
update> is the release or issue number of the latest
<
. Do not use the .tar.gz extension at the end of the file
to list Communication Manager files to verify the new
Enter
Installation and Upgrades for G700 and S8300
to access the FTP directory.
.
December 2003