Administer Ip Interfaces - Avaya G700 Installation And Upgrades

2
Enter the names of up to six LSPs to be assigned to region 1. The LSP names must be the same as
administered on the Node Names form.
3
Submit the form.
4
Repeat for each network region to which you want to assign LSPs.

Administer IP Interfaces

Define the IP interfaces of the S8500 or S8700 port network CLAN boards
NOTE:
This should have already been established as a part of normal S8500 or S8700 installation.
1
Type
change ip-interfaces
IP Interfaces Screen
change ip-interfaces procr
Gateway Address: 135.9.41.254
Enable Ehternet Port? y
Number of CLAN Sockets Before Warning: 400
2
Complete the fields as described the in the following table.
Field
Type
Slot
Code/Suffix
Node name
IP Address
Subnet Mask
Gateway Address
Installation and Upgrades for G700 and S8300
December 2003
to open the IP Interfaces screen.
Type: C-LAN
Slot: 01A03
Code/Suffix: TN799 d
Node Name: procr
IP Address: 135.9.41.146
Subnet Mask: 255.255.255.0
Nework Region: 1
VLAN: 0
Either C-LAN.
The slot location for the circuit pack.
Display only. This field is automatically populated with TN799 for C-
LAN.
The unique node name for the IP interface. The node name here must
already be administered on the Node Names screen.
The IP address (on the customer LAN) of the C-LAN.
The subnet mask associated with the IP address for this IP interface.
For more information on IP addresses and subnetting, see
"Administration for Network Connectivity for Avaya Communication
Manager, 555-233-504".
The address of a network node that serves as the default gateway for
the IP interface.
Installing a New G700 with an S8300
Administer Communication Manager
IP INTERFACES
Conditions/Comments
3
Page 1 of 1
1 of 2
159