Rear Brake Master Cylinder Disassembly And Assembly - Suzuki GSX1300R Manual

Rear Brake Master Cylinder Disassembly and
Assembly
Refer to "Front Brake Master Cylinder Assembly
Removal and Installation (Page 4A-10)".
Disassembly
1) Disconnect the reservoir hose (1).
2) Remove the lock-nut (2).
1
3) Remove the brake hose connector (3) and O-ring
(4).
Special tool
: 09900–06108 (Snap ring pliers)
4
4) Pull out the dust boot (5) and remove the snap ring
(6).
Special tool
: 09900–06108 (Snap ring pliers)
5
B815H24106017
2
I815H1410047-01
3
I815H1410048-02
6
I815H1410049-01
Brake Control System and Diagnosis:
5) Remove the push rod (7), piston/cup set (8) and
spring (9).
Assembly
Assemble the master cylinder in the reverse order of
disassembly. Pay attention to the following points:
CAUTION
!
• Wash the master cylinder components with
new brake fluid before reassembly.
• Do not wipe the brake fluid off after
washing the components.
• When washing the components, use the
specified brake fluid. Never use different
types of fluid or cleaning solvents such as
gasoline, kerosine, etc.
• Apply brake fluid to the master cylinder
bore and all of the master cylinder
component to be inserted into the bore.
BF: Brake fluid (DOT 4)
4A-15
9
7
8
I815H1410050-01
I649G1410036-02