Rear Master Cylinder Removal And Disassembly - Suzuki RM-Z250 Service Manual

Hide thumbs Also See for RM-Z250:

Table of Contents

REAR MASTER CYLINDER REMOVAL AND

• Drain brake fluid. (17-5)

• Remove the cotter pin 1 and then master cylinder rod pin 2

and washer. (17-18)

• Remove the master cylinder 4 by removing the bolts 3.

• Place a rag under the brake hose union bolt 5 to catch spilled

brake fluid.

• Disconnect the brake hose 6 by removing the union bolt 5.

• Remove the master cylinder.

• Remove the dust boot 7 and snap ring 8.

 09900-06108: Snap ring remover (Close type)

• Remove the push rod 9.

• Remove the piston/cup set 0.

FRONT AND REAR BRAKES 17-17

Chapters

Table of Contents