Suzuki GSX1300R HAYABUSA Service Bulletin

Suzuki GSX1300R HAYABUSA Service Bulletin

4-stroke gs/gsx/gsx-r - 106
Hide thumbs Also See for GSX1300R HAYABUSA:

Advertisement

MOTORCYCLE DIVISION
MODEL:
GSX1300R HAYABUSA
SUBJECT:

OIL GALLERY PLUG TORQUE SPECIFICATION CHANGE

REFERENCE:
GSX1300R SERVICE MANUAL - PN 99500-39180-03E
ATTACHMENT: REPLACEMENT PAGE 8-43 FOR SERVICE MANUAL
NOTICE:
The oil gallery plug tightening torque specification has been changed. The change is effective
on motorcycles produced during or after May, 1999. When servicing a GSX1300R engine,
use the revised specification. Please insert the enclosed revised page 8-43 into your
GSX1300R service manual or change your manual per the information listed below.
AFFECTED DEPARTMENTS:
The following departments in your dealership should be notified of this information:
! ! Management
! ! Service
! !
! !
!
!
American Suzuki Motor Corporation
Technical Service Department
Motorcycle
GSX1300R Service Manual
change required on page
8-43
OIL GALLERY PLUG TORQUE
ORIGINAL
10 N
Oil gallery plug
(1.0 kgf
(M8)
Change to
REVISED
18 N
Oil gallery plug
(1.8 kgf
(M8)
" Warranty
BULLETIN NO. GS/GSX/GSX-R - 106
m
.
m, 7.0 lb-ft))
.
m
.
m, 13.0 lb-ft)
.
" Sales
" Parts
4-STROKE
DATE: 5/14/1999
" Accessories

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GSX1300R HAYABUSA and is the answer not in the manual?

Questions and answers

Summary of Contents for Suzuki GSX1300R HAYABUSA

  • Page 1 13.0 lb-ft) (M8) AFFECTED DEPARTMENTS: The following departments in your dealership should be notified of this information: ! ! Management ! ! Service " Warranty " Sales " Parts " Accessories American Suzuki Motor Corporation Technical Service Department Motorcycle...
  • Page 2 SERVICING INFORMATION 8-43 TIGHTENING TORQUE - REVISED 5/1999 ENGINE N . m kgf . m ITEM lb-ft Exhaust pipe bolt 16.5 Muffler mounting nut 16.5 Muffler joint nut 18.0 Speed sensor rotor bolt 13.0 Engine sprocket nut 12.5 105.0 Engine mounting bolt and nut (M:12) 54.0 (M:10)
  • Page 3: Cooling And Lubrication System

    8-44 SERVICING INFORMATION N . m kgf . m ITEM lb-ft Piston cooling oil jet bolt Oil jet (For generator) Oil pump mounting bolt Conrod bearing cap bolt (Initial) 25.5 (Final) 48.5 Bearing retainer screw Cam chain guide retainer screw Balancer arm bolt Balancer cover bolt Breather pipe bolt...

Table of Contents

Save PDF