9B-6 Lighting Systems:
5) Remove the combination light brackets (upper and
lower) (4).
Installation
Install the rear combination light in the reverse order of
removal. Pay attention to the following point:
• Tighten the combination light mounting bolts (1) to the
specified torque.
Rear Combination Light Replacement
CAUTION
!
If LED operation is abnormal, replace the rear combination light with a new one.
License Plate Light Components
2
4
I815H1920019-01
1
3
1. License plate light bulb (12 V 5 W)
2. Lens cover
NOTE
When reusing the removed bolts (1), apply a
small quantity of the thread lock to them.
Tightening torque
Combination light mounting bolt (a): 2.8 N·m (
0.28 kgf-m, 2.0 lb-ft)
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
1
1
3. Lens
: 5 N⋅m (0.5 kgf-m, 3.5 lb-ft)
(a)
(a)
I815H1920020-01
B815H29206010
B815H29206011
(a)
I815H1920022-01