Water Hose Inspection - Suzuki GSX1300R Manual

Installation
Install the radiator in the reverse order of removal. Pay
attention to the following points:
• Connect the radiator hoses securely. Refer to "Water
Hose Routing Diagram (Page 1F-3)".
• Pour engine coolant. Refer to "Cooling System
Inspection in Section 0B (Page 0B-13)".
• Bleed air from the cooling circuit. Refer to "Cooling
System Inspection in Section 0B (Page 0B-13)".
• Fill the reservoir tank to the upper level "A". Refer to
"Cooling System Inspection in Section 0B (Page 0B-
13)".
"A"

Water Hose Inspection

Inspect the water hoses in the following procedures:
1) Remove the side cowlings. Refer to "Exterior Parts
Removal and Installation in Section 9D (Page 9D-
14)".
2) Check the water hoses for crack, damage or engine
coolant leakage. If any defect is found, replace the
radiator hose with a new one.
3) Any leakage from the connecting section should be
corrected by proper tightening. Refer to "Water Hose
Routing Diagram (Page 1F-3)".
I815H1160013-01
B815H21606005
4) After finishing the water hose inspection, reinstall the
removed parts.
Engine Cooling System:
I815H1160014-01
I815H1160015-01
I815H1160016-01
1F-7