Iap Sensor Inspection; Iap Sensor Removal And Installation; Tp Sensor Inspection; Tp Sensor Removal And Installation - Suzuki GSX1300R Manual

1C-3 Engine Electrical Devices:
Installation
Install the CKP sensor in the reverse order of removal.
Refer to "Generator Removal and Installation in Section
1J (Page 1J-6)".

IAP Sensor Inspection

Refer to "DTC "C13" (P0105-H/L): IAP Sensor Circuit
Malfunction in Section 1A (Page 1A-33)".

IAP Sensor Removal and Installation

Removal
1) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-
9)".
2) Disconnect the coupler (1) and vacuum hose (2).
3) Remove the IAP sensor (3) from the air cleaner box.
3
Installation
Install the IAP sensor in the reverse order of removal.

TP Sensor Inspection

Refer to "DTC "C14" (P0120-H/L): TP Sensor Circuit
Malfunction in Section 1A (Page 1A-40)".
B815H21306006
B815H21306007
1
2
I815H1130005-01
B815H21306008

TP Sensor Removal and Installation

Refer to "Throttle Body Disassembly and Assembly in
Section 1D (Page 1D-12)".
Removal
1) Remove the throttle body. Refer to "Throttle Body
Removal and Installation in Section 1D (Page 1D-
10)".
2) Remove the TP sensor (1) with the special tool.
Special tool
: 09930–11950 (Torx wrench)
NOTE
Prior to disassembly, mark the TP sensor's
original position with a paint or scribe for
accurate reinstallation.
1
B815H21306009
I815H1130006-01