Suzuki GSX1300R Manual page 336

1E-11 Engine Lubrication System:
Oil Jet (For Transmission)
Removal
1) Remove the engine assembly. Refer to "Engine
Assembly Removal in Section 1D (Page 1D-19)".
2) Separate the crankcases, upper and lower. Refer to
"Engine Bottom Side Disassembly in Section 1D
(Page 1D-63)".
3) Remove the oil jet (1) (for transmission oil spray)
from the upper crankcase.
4) Remove the oil jet (2) (for transmission) from the
lower crankcase.
2
Installation
Installation is in the reverse order of removal.
Oil Jet (For Generator)
Removal
1) Remove the generator cover. Refer to "Generator
Removal and Installation in Section 1J (Page 1J-6)".
2) Remove the oil jet (1) (for generator).
1
I815H1150021-01
I815H1150022-01
1
I815H1150023-01
Installation
Installation is in the reverse order of removal. Pay
attention to the following point:
• Tighten the oil jet (for generator) to the specified
torque.
Tightening torque
Oil jet (For generator) (a): 5 N·m (0.5 kgf-m, 3.5 lb-
ft)
Oil Gallery Jet
Removal
1) Remove the oil filter. Refer to "Engine Oil and Filter
Replacement in Section 0B (Page 0B-10)".
2) Remove the oil gallery jet (1) from the lower
crankcase.
Installation
Installation is in the reverse order of removal. Pay
attention to the following point:
• Replace the oil filter with a new one. Refer to "Engine
Oil and Filter Replacement in Section 0B (Page 0B-
10)".
(a)
I815H1150024-01
1
I815H1150025-01