Suzuki GSX1300R Manual page 139

P1651-L (Use of SDS)
Step
1 1) Turn the ignition switch OFF.
2) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-9)".
3) Check the TO sensor coupler (1) for loose or poor
contacts.
If OK, then check the TO sensor lead wire continuity.
1
4) Disconnect the TO sensor coupler.
5) Check the continuity between the B wire and ground.
Also, check the continuity between the B wire and B/Br
wire. If the sound is not heard from the tester, the circuit
condition is OK.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity test (
Action
I823H1110050-01
)
I823H1110053-02
Engine General Information and Diagnosis:
Yes
Go to Step 2.
(A)
1A-68
No
R or B wire open, or B
wire shorted to the
ground.