Swingarm / Cushion Rod Removal And Installation - Suzuki GSX1300R Manual

Swingarm / Cushion Rod Removal and
Installation
Removal
1) Cut the drive chain. Refer to "Drive Chain
Replacement in Section 3A (Page 3A-7)".
2) Remove the rear wheel assembly. Refer to "Rear
Wheel Assembly Removal and Installation in Section
2D (Page 2D-11)".
3) Remove the brake hose clamp bolt (1).
4) Remove the brake caliper from the swingarm.
5) Remove the rear shock absorber (2). Refer to "Rear
Shock Absorber / Cusion Lever Removal and
Installation (Page 2C-3)".
2
B815H22306011
1
I815H1230024-01
I815H1230025-01
6) Remove the swingarm pivot shaft lock-nut with the
special tool.
Special tool
(A): 09940–14970 (Swingarm pivot thrust
adjuster socket wrench)
(A)
7) Hold the swingarm pivot shaft (3) and remove the
swingarm pivot nut (4).
Special tool
(B): 09900–18740 (Hexagon socket (24
mm))
(B)
3
Rear Suspension: 2C-8
I815H1230026-02
4
I815H1230027-02