Rear Brake Master Cylinder Disassembly And Assembly - Suzuki VLR1800 Service Manual

4A-16 Brake Control System and Diagnosis:
Rear Brake Master Cylinder Disassembly and
Assembly
Refer to "Rear Brake Master Cylinder Removal and
Installation (Page 4A-14)".
Disassembly
1) Remove the snap ring (1), brake hose connector (2)
and O-ring (3).
Special tool
: 09900–06108 (Snap ring pliers)
3
2
1
2) Pull out the dust boot (4) and remove the snap ring
(5).
Special tool
: 09900–06108 (Snap ring pliers)
4
B822H14106017
I822H1410039-01
5
I822H1410040-01
3) Remove the push rod (6), piston/cup set (7) and
spring (8).
Assembly
Assemble the master cylinder in the reverse order of
disassembly. Pay attention to the following points:
CAUTION
!
• Wash the master cylinder components with
new brake fluid before reassembly.
• Do not wipe the brake fluid off after
washing the components.
• When washing the components, use the
specified brake fluid. Never use different
types of fluid or cleaning solvents such as
gasoline, kerosine, etc.
• Apply brake fluid to the master cylinder
bore and all of the master cylinder
component to be inserted into the bore.
BF: Brake fluid (DOT 4)
8
7
6
I822H1410041-01
I649G1410036-02