1B-17 Emission Control Devices:
2) When air is blown into the fuel shut-off valve with its
side "A" positioned sideways, the air cannot pass
through to the canister side. If the fuel shut-off valve
operates otherwise, it must be replaced.
WARNING
!
Gasoline and gasoline vapor is toxic. A small
amount of fuel remains in the fuel shut-off
valve when checking it. Do not swallow the
fuel when blowing the fuel shut-off valve.
Service Data
FI sensors
Item
HO2 sensor heater resistance
HO2 sensor output voltage
PAIR control solenoid valve
resistance
EVAP system purge control
solenoid valve resistance
Tightening Torque Specifications
Fastening part
HO2 sensor
PAIR reed valve cover bolt
NOTE
The specified tightening torque is also described in the following.
"Exhaust Emission Control System Description (Page 1B-3)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C
(Page 0C-9)".
Specifications
Specification
Approx. 8 Ω at 23 °C (73 °F)
0.3 V and less at idle speed
0.6 V and more at 3 000 r/min
20 – 24 Ω at 20 – 30 °C (68 – 86 °F)
Approx. 32 Ω at 20 °C (68 °F)
Tightening torque
N⋅m
kgf-m
25
2.5
11
1.1
"A"
I823H1120038-02
B815H21207001
Note
E-33 only
B815H21207002
Note
lb-ft
18.0
(Page 1B-9)
8.0
(Page 1B-10)