Rear Brake Master Cylinder Disassembly And Assembly - Suzuki SFV650 Service Manual

Rear Brake Master Cylinder Disassembly and
Assembly
Disassembly
1) Disconnect the reservoir hose (1).
2) Remove the lock-nut (2).
3) Remove the snap ring (3).
2
4) Remove the brake hose connector (4) and O-ring
(5).
5) Pull out the dust boot (6) and remove the snap ring
(7).
Special tool
: 09900–06108 (Snap ring pliers)
B944H14106016
1
I944H1410041-01
3
I944H1410031-02
4
5
I944H1410030-02
Brake Control System and Diagnosis:
6
6) Remove the push rod (8), piston/cup set (9) and
spring (10).
10
Assembly
Assemble the master cylinder in the reverse order of
disassembly. Pay attention to the following points:
CAUTION
!
• Wash the master cylinder components with
new brake fluid before reassembly.
• Do not wipe the brake fluid off after
washing the components.
• When washing the components, use the
specified brake fluid. Never use different
types of fluid or cleaning solvents such as
gasoline, kerosine, etc.
• Apply brake fluid to the master cylinder
bore and all of the master cylinder
component to be inserted into the bore.
BF: Brake fluid (DOT 4)
4A-15
7
I944H1410032-02
9
8
I944H1410033-04
I649G1410036-02