Rear Master Cylinder Removal And Disassembly; Master Cylinder Inspection - Suzuki RM 250 2003 Owner's Service Manual

14-12 FRONT AND REAR BRAKES
• Remove the diaphragm.
• Remove the dust seal boot 1.
• Remove the snap ring 2 with snap ring pliers.
• Remove the washer 3, piston 4 and spring 5.
' 09900-06105: Snap ring pliers
REAR MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Drain brake fluid. ($14-4)
• Place a rag under the hose to catch spilled brake fluid.
• Remove the brake hose union bolt.
• Remove the master cylinder mounting bolts.
• Remove the master cylinder cap.
• Remove the diaphragm.
• Remove the dust seal boot 1.
• Remove the snap ring 2 with snap ring pliers.
• Remove the push rod 3.
• Remove the piston/cup set 4.
' 09900-06105: Snap ring pliers

MASTER CYLINDER INSPECTION

• Inspect the cylinder bore and piston for scuffing.
• Inspect the piston rod and spring for damage.