Horn Inspection; Horn Removal And Installation - Suzuki GSX1300R Manual

Horn Inspection

NOTE
If the horn sound condition is normal, it is not
necessary to inspect the horn button
continuity.
Horn Button Inspection
1) Remove the left fuel tank cover. Refer to "Exterior
Parts Removal and Installation in Section 9D
(Page 9D-14)".
2) Disconnect the left handlebar switch lead wire
coupler (1).
NOTE
Blue tape "A" is sicked on the left handle bar
switch harness.
3) Inspect the horn button for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to "Handlebar Removal and Installation in
Section 6B (Page 6B-3)".
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
B815H29306017
1
I815H1930019-01
I718H1930028-03
Combination Meter / Fuel Meter / Horn:
Horn Inspection
1) Disconnect the horn coupler (1).
1
2) Connect a 12 V battery to the horn terminals. If the
sound is not heard from the horn, replace the horn
with a new one.
3) Connect the horn coupler.

Horn Removal and Installation

Removal
1) Disconnect the horn coupler (1).
2) Remove the horn (2) by removing the mounting
bolts.
1
Installation
Install the horn in the reverse order of removal.
9C-9
I815H1930020-01
I815H1930021-01
B815H29306018
2
I815H1930022-01