Specifications; Service Data; Tightening Torque Specifications - Suzuki GSX1300R Manual

2C-13 Rear Suspension:

Service Data

Suspension
Unit: mm (in)
Item
Rear shock absorber spring pre-set
length
Rear shock absorber damping force
adjuster
Rear wheel travel
Swingarm pivot shaft runout

Tightening Torque Specifications

Fastening part
Rear shock absorber mounting nut
Cushion lever mounting nut
Cushion rod mounting nut
Rear shock absorber lower mounting nut
Swingarm pivot shaft
Swingarm pivot nut
Swingarm pivot lock-nut
NOTE
The specified tightening torque is also described in the following.
"Rear Suspension Components (Page 2C-1)"
"Rear Suspension Assembly Construction (Page 2C-2)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C
(Page 0C-9)".
5) Install the swingarm. Refer to "Swingarm / Cushion
I815H1230047-01

Specifications

Standard
Rebound 12 clicks out from stiffed position
Compression 8 clicks out from stiffed position
Tightening torque
N⋅m
50
78
78
50
15
100
90
Rod Removal and Installation (Page 2C-8)".
195 (7.7)
140 (5.5)
—
kgf-m lb-ft
5.0 36.0
7.8 56.5
7.8 56.5
5.0 36.0
1.5 11.0
10.0 72.5
9.0 65.0
B815H22307001
Limit
—
—
—
0.3 (0.01)
B815H22307002
Note
(Page 2C-3) /
(Page 2C-10)
(Page 2C-3) /
(Page 2C-6) /
(Page 2C-10)
(Page 2C-6) /
(Page 2C-10)
(Page 2C-6)
(Page 2C-9)
(Page 2C-10)
(Page 2C-10)