Clutch Master Cylinder Components Inspection; Clutch Release Cylinder / Push Rod Removal And Installation - Suzuki GSX1300R Manual

5C-10 Clutch:

Clutch Master Cylinder Components Inspection

Refer to "Clutch Master Cylinder / Clutch Lever
Disassembly and Assembly (Page 5C-8)".
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Piston
Inspect the piston surface for any scratches or other
damage.
Rubber Parts
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
Clutch Release Cylinder / Push Rod Removal
B815H25306010
and Installation
Removal
1) Drain clutch fluid. Refer to "Clutch Fluid
Replacement (Page 5C-4)".
2) Remove the left side cowling. Refer to "Exterior
Parts Removal and Installation in Section 9D
(Page 9D-14)".
3) Place a rag under the clutch hose union bolt (1) to
catch any spilt brake fluid.
4) Remove the clutch hose union bolt (1).
5) Remove the air bleeder valve (2).
6) Remove the clutch release cylinder mounting bolts
(3).
I815H1530024-01
7) Remove the gearshift link arm (4) and engine
sprocket cover bolts.
I815H1530025-01
8) Remove the clutch release cylinder cover (5).
B815H25306011
2
1
3
I815H1530026-01
4
I815H1530027-01
5
I815H1530028-01