Adjusting Mouse Settings; Attaching Prior Models To A Kvm S3-1621 Appliance - Fujitsu series3-1621 User Giude

2.8

Adjusting mouse settings

Before a computer connected to the KVM s3-1621 appliance can be used for
remote user control, you must set the target mouse speed and turn off acceleration.
If you are experiencing slow mouse response during a remote video session,
deactivate mouse acceleration in the operating system of the target device and set
the mouse speed at 50%.
2.9 Attaching prior models to a KVM s3-1621
appliance
You can add earlier appliance models for integration into the existing configuration. In a
tiered system, each ARI port will accommodate one target device. When earlier
appliance models are tiered under the KVM s3-1621 appliance, the KVM s3-1621 or
appliance must be at the top level of the tier. Table 1 lists earlier KVM appliance models
that are compatible with the KVM s3-1621 appliance configuration.
Earlier appliance model
KVM s2-0801 (analog)
KVM s2-1602 (analog)
Table 1: Earlier KVM appliance models
Mount the earlier appliance model into the rack according to the instructions that
are included with that appliance.
Perform one of the following actions:
• Attach the keyboard, monitor, and mouse connectors of a KVM-IA to the local
port on the tiered appliance and attach one end of a Cat 5 cable to the end of
the KVM s2-Adapter PS/2-VGA KVM-IA.
-or-
• Attach one end of a Cat 5 cable directly to the Analog Console Interface (ACI)
port on the tiered appliance. (If you are unsure if the appliance being tiered has
an ACI port, please consult the Installer/User guide for the tiered appliance.)
Connect the other end of the Cat 5 cable to any available ARI port on the rear of the
KVM s3-1621 appliance.
Turn off and turn on the target devices to the tiered appliances according to the
instructions that are included with that appliance.
Turn off and turn on the tiered appliances to enable its local port to recognize the
KVM-IA.
Repeat steps 1 to 5 for all tiered appliances that you want to attach to the switching
system.
The switching system will automatically merge the two appliances. All target devices
that are connected to the tiered appliances are included in the main KVM s3-1621
target device list in the OSCAR interface. However, when an earlier appliance model is
590-591-609D
Remote users Local Users
0
0
Adjusting mouse settings
ARI ports
1 8
1 16
13