Troubleshooting
Overview
Operation problems can be due to a variety of causes. The first step in solving them is to make sure that
all cables are securely attached and seated completely in their sockets.
Mouse and/or Keyboard not
responding
All Station IDs display as 01
OSD Factory Default Settings
Setting
OSD Hotkey
Port ID Display Position
Port ID Display Duration
Port ID Display Mode
Scan Duration
Scan/Skip Mode
Screen Blanker
Hotkey Command Mode
Hotkey
Logout Timeout
Beeper
Accessible Ports
Operation Mode
OSD Language
30
Symptom
Unplug the cable from the console port, then plug it back in.
Station 1 suddenly lost power. Wait a few seconds for the system to
re-initialize the station sequence and display the proper IDs.
• Perform a reset on station ID (see "Reset Station IDs" on page 20).
• Unplug the chaining cable, then plug it back in.
[S
L
CROLL
OCK
Upper Left Corner
3 Seconds
The Port Number plus the Port Name
5 Seconds
All
OFF
ON
[N
L
UM
OCK
OFF
ON
F (Full Access) For all Users on all Ports
Share
English
Default
] [S
L
]
CROLL
OCK
] + [-]
Action