Network Management (Snmp) Commands - D-Link xStack DGS-3426 Cli Manual

The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
The DGS-3400 Series supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. After enabling SNMP,
you can specify which version of SNMP you want to use to monitor and control the Switch. three versions of SNMP vary in the
level of security provided between the management station and the network device. The following table lists the security features
of the three SNMP versions:
SNMP
Version
v1
v2c
v3
v3
v3
Command
create snmp user
delete snmp user
show snmp user
create snmp view
delete snmp view
show snmp view
create snmp community
delete snmp community
show snmp community
config snmp engineID
show snmp engineID
create snmp group
delete snmp group
show snmp groups
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
N
ETWORK
Authentication
Method
Community String
Community String
Username
MD5 or SHA
MD5 DES or SHA DES
Parameters
<username 32> <groupname 32> {encrypted [by_password auth [md5
<auth_password 8-16 > | sha <auth_password 8-20 >] priv [none | des
<priv_password 8-16>] | by_key auth [md5 <auth_key 32-32>| sha
<auth_key 40-40>] priv [none | des <priv_key 32-32>]]}
<username 32>
<view_name 32> <oid> view_type [included | excluded]
<view_name 32> [all | oid]
<view_name 32>
<community_string 32> view <view_name 32> [read_only | read_write]
<community_string 32>
<community_string 32>
<snmp_engineID 10-64>
<groupname 32> {v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv ]}
{read_view <view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>}
<groupname 32>
M
ANAGEMENT
Description
Community String is used for authentication −
NoAuthNoPriv
Community String is used for authentication −
NoAuthNoPriv
Username is used
NoAuthNoPriv
Authentication is based on the HMAC-MD5 or
HMAC-SHA algorithms − AuthNoPriv
Authentication is based on the HMAC-MD5 or
HMAC-SHA algorithms − AuthPriv.
DES 56-bit encryption is added based on the
CBC-DES (DES-56) standard
27
(SNMP) C
OMMANDS
−
for authentication
7