Network Management (Snmp) Commands - D-Link DES-3010F Command Line Interface Manual

The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
The DES-3026 supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. The user may specify which
version of the SNMP to use to monitor and control the Switch. The three versions of SNMP vary in the level of security provided
between the management station and the network device. The following table lists the security features of the three SNMP
versions:
SNMP
Version
v1
v2c
v3
v3
v3
Command
create snmp user
delete snmp user
show snmp user
create snmp view
delete snmp view
show snmp view
create snmp community
delete snmp community
show snmp community
config snmp engineID
show snmp engineID
create snmp group
delete snmp group
show snmp groups
DES-3000 Series Layer 2 Switch CLI Reference Manual
N
ETWORK
Authentication Method
Community String
Community String
Username
MD5 or SHA
MD5 DES or SHA DES
Parameters
<SNMP_name 32> <groupname 32> {encrypted [by_password auth [md5
<auth_password 8-16> | sha <auth_password 8-20>] priv [none | des
<priv_password 8-16>] | by_key auth [md5 <auth_key 32-32>|
sha<auth_key 40-40>] priv [none | des <priv_key 32-32>]]}
<SNMP_name 32>
<view_name 32> <oid> view_type [included | excluded]
<view_name 32> [all | oid]
{<view_name 32>}
<community_string 32> view <view_name 32> [read_only | read_write]
<community_string 32>
{<community_string 33>}
<snmp_engineID 10-64>
<groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
{read_view <view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>}
<groupname 32>
M
ANAGEMENT
Description
Community String is used for authentication  NoAuthNoPriv
Community String is used for authentication  NoAuthNoPriv
Username is used for authentication
Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms
 AuthNoPriv
Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms
 AuthPriv.
DES 32-bit encryption is added based on the CBC-DES (DES-32)
standard
28
(SNMP) C
OMMANDS
6