Network Management (Snmp) Commands; Command Parameters - D-Link xStack DES-3200 Series Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
The Switch supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. Users can specify which version of
the SNMP users want to use to monitor and control the Switch. The three versions of SNMP vary in the level of security provided
between the management station and the network device. The following table lists the security features of the three SNMP
versions:
SNMP Authentication Method
Version
v1 Community String
v2c Community String
v3 Username
v3 MD5 or SHA
v3 MD5 DES or SHA DES
The Network Management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table:
Command
create snmp user
delete snmp user
show snmp user
create snmp view
delete snmp view
show snmp view
create snmp community
delete snmp community
show snmp community
config snmp engineID
show snmp engineID
create snmp group
delete snmp group
show snmp groups
N M
ETWORK
Description
Community String is used for authentication  NoAuthNoPriv
Community String is used for authentication  NoAuthNoPriv
Username is used for authentication  NoAuthNoPriv
Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms 
AuthNoPriv
Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms  AuthPriv.
DES 56-bit encryption is added based on the CBC-DES (DES-56) standard
Parameters
<SNMP_name 32> <groupname 32> {encrypted [by_password auth [md5
<auth_password 8-16 > | sha <auth_password 8-20>] priv [none | des
<priv_password 8-16>] | by_key auth [md5 <auth_key 32-32> | sha <auth_key
40-40>] priv [none | des <priv_key 32-32>]]}
<SNMP_name 32>
<view_name 32> <oid> view_type [included | excluded]
<view_name 32> [all | oid]
{<view_name 32>}
<community_string 32> view <view_name 32> [read_only | read_write]
<community_string 32>
{<community_string 32>}
<snmp_engineID 10-64>
<groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
{read_view <view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>} (1)
<groupname 32>
ANAGEMENT
43
(SNMP) C
OMMANDS
8