Asymmetric Vlan Commands - D-Link xStack DES-3200 Series Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
The Asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections:
enable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable asymmetric VLANs:
DES-3200-28:4#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-3200-28:4#
disable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable asymmetric VLANs:
A
Parameters
Used to enable asymmetric VLANs on the Switch.
enable asymmetric_vlan
This command is used to enable the asymmetric VLAN function on
the Switch
None.
Only Administrator-level users can issue this command.
Used to disable asymmetric VLANs on the Switch.
disable asymmetric_vlan
This command is used to disable the asymmetric VLAN function on
the Switch
None.
Only Administrator-level users can issue this command.
331
VLAN C
SYMMETRIC
40
OMMANDS