Asymmetric Vlan Commands - D-Link DXS-1210-12TC Reference Manual

6. Asymmetric VLAN Commands

6-1 asymmetric-vlan
This command is used to enable the asymmetric VLAN function. Use the no form of this command to
disable the asymmetric VLAN function.
asymmetric-vlan
no asymmetric-vlan
Parameters
None.
Default
By default, this feature is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enable or disable the asymmetric VLAN function.
Example
This example shows how to enable asymmetric VLAN.
Switch# configure terminal
Switch(config)# asymmetric-vlan
This example shows how to disable asymmetric VLAN.
Switch# configure terminal
Switch(config)# no asymmetric-vlan
6-2 show asymmetric-vlan
This command is used to display asymmetric VLAN information
show asymmetric-vlan
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
71