Table of Contents
Advertisement
3.2.8.7
Exiting Scenario Mode
When you want to close the Scenario mode after using it for device configuration, follow the
procedure below:
To close the Scenario mode:
1.
Simply click any tab (besides the Scenarios tab) on the Navigation bar, or click the
Cancel Scenarios button located at the bottom of the Navigation tree; a message box
appears, requesting you to confirm exiting Scenario mode, as shown below.
Figure 3-21: Confirmation Message Box for Exiting Scenario Mode
2.
Click OK to exit.
3.2.9
Customizing the Web Interface
You can customize the device's Web interface to suit your company preferences. The
following Web interface elements can be customized:
Corporate logo displayed on the Title bar (refer to ''Replacing the Corporate Logo'' on
page 48)
Product's name displayed on the Title bar (refer to ''Customizing the Product Name'' on
page 50)
Login welcome message (refer to ''Creating a Login Welcome Message'' on page 51)
3.2.9.1
Replacing the Corporate Logo
The corporate logo that appears in the Title bar can be replaced either with a different logo
image (refer to ''Replacing the Corporate Logo with an Image'' on page 49) or text (refer to
''Replacing the Corporate Logo with Text'' on page 50).
The figure below shows an example of a customized Title bar. The top image displays the
Title bar with AudioCodes logo and product name. The bottom image displays a customized
Title bar with a different image logo and product name.
Figure 3-22: Customizing Web Logo and Product Name
SIP User's Manual
48
MP-500 MSBG
Document #: LTRT-12801
Advertisement
Table of Contents
Troubleshooting
