Maintenance; Regional Settings; Locking And Unlocking The Gateway - AudioCodes Mediant 1000 User Manual

5.13

Maintenance

The Maintenance menu is used for the following operations:
Locking and unlocking the gateway (refer to 'Locking and Unlocking the Gateway' on
page 276)
Saving the gateway's configuration (refer to 'Saving Configuration' on page 278)
Resetting the Gateway (refer to 'Resetting the Gateway' on page 279)

5.13.1 Regional Settings

The 'Regional Settings' screen allows you to define and view the gateway's internal date
and time.
To configure the gateway's date and time, take these 3 steps:
1. Open the 'Regional Settings' screen (Advanced Configuration menu > Regional
Settings).
2. Enter the time and date where the gateway is installed.
3. Click the Set Date & Time button; the date and time are automatically updated.
Notes:

5.13.2 Locking and Unlocking the Gateway

The Lock and Unlock options allow you to lock the gateway so that it doesn't accept any
new incoming calls. This is beneficial when, for example, you are uploading new software
files to the gateway and you don't want any traffic to interfere with the process.
SIP User's Manual
Figure 5-70: Regional Settings Screen
•
After performing a hardware reset, the date and time are returned to their
defaults and should therefore be updated.
•
For configuring the gateway to obtain the time from an SNTP server,
refer to 'Simple Network Time Protocol Support' on page 430.
276
Mediant 1000
Document #: LTRT-83302