Igmp Configuration - Accton Technology ES4626 Management Manual

Click DVMRP tunnel configuration. Users can create and delete DVMRP tunnel. See
the equivalent CLI command at 16.5.2.2.9:
Neighbor ip address – Specify neighbor ip address
Metric – Specify metric to neighbor
Vlan Port –Specify the layer 3 port
Apply – Create DVMRP tunnel to neighbor
Delete tunnel - Delete DVMRP tunnel to neighbor
16.7.5

IGMP configuration

In IGMP mode, click IGMP additive parameter configuration. Users can configure
IGMP interface parameters. See the equivalent CLI command at 16.6.2.2.1, 16.6.2.2.2,
16.6.2.2.3, 16.6.2.2.4, 16.6.2.2.5 and 16.6.2.2.6:
Set Acl for IGMP group – Configure Acl for IGMP group. See the equivalent CLI
command at 16.6.2.2.1
Add interface to IGMP group - Add interface to IGMP group. See the equivalent CLI
command at 16.6.2.2.2
Add IGMP static group to VLAN - Add IGMP static group to VLAN. See the equivalent
CLI command at 16.6.2.2.6
IGMP query interval – Configure IGMP query interval. See the equivalent CLI
command at 16.6.2.2.3
Max-response IGMP request time – Configure Max-response IGMP request time.
See the equivalent CLI command at 16.6.2.2.4
IGMP query timeout – Configure IGMP query timeout. See the equivalent CLI
500