Accton Technology ES4626 Management Manual page 24

port-channel
<port-channel-nu
mber> command
under
Mode.
1.2.1.1.3.2
Using the vlan <vlan-id> command under Global Mode can enter the corresponding
VLAN Mode. Under VLAN Mode the user can configure all member ports of the
corresponding VLAN. Run the exit command to exit the VLAN Mode to Global Mode.
1.2.1.1.3.3
Type the ip dhcp pool <name> command under Global Mode will enter the DHCP
Address Pool Mode prompt "Switch(Config-<name>-dhcp)#". DHCP address pool
properties can be configured under DHCP Address Pool Mode. Run the exit command to
exit the DHCP Address Pool Mode to Global Mode.
1.2.1.1.3.4
Routing Entry
Protocol
RIP Type router
Routing
rip
Protocol command
under
Global
Mode.
OSPF Type router
Routing
ospf
Protocol command
under
Global
Mode.
port-channelx)#
Global
VLAN Mode
DHCP Address Pool Mode
Route Mode
Prompt
Switch(Config-Router-Rip)#
Switch(Config-Router-Ospf)# Configure
24
port-channel command to
related return
settings such Global Mode.
as duplex
mode, speed,
etc.
Operates Exit
Configure Use
RIP protocol "exit"
parameters. command to
return
Global
Mode.
Use
OSPF "exit"
protocol command to
parameters. return
Global
Mode.
to
the
to
the
to