Configuration Modes; User Mode; Admin Mode - Accton Technology ES4626 Management Manual

Input verification
Fuzzy match support

1.2.1.1 Configuration Modes

1.2.1.1.1

User Mode

On entering the CLI interface, entering user entry system first. If as common user, it is
defaulted to User Mode. The prompt shown is "Switch>", the symbol ">" is the prompt for
User Mode. When disable command is run under Admin Mode, it will also return to the
User Mode.
Under User Mode, no configuration to the switch is allowed, only clock time and
version information of the switch can be queries.
1.2.1.1.2

Admin Mode

To enter Under Admin Mode see the following: In user entry system, if as Admin user,
it is defaulted to Admin Mode. Admin Mode prompt "Switch#" can be entered under the
User Mode by running the enable command and entering corresponding access levels
admin user password, if a password has set. Or, when exit command is run under Global
User Mode
Admin Mode
Global Mode
Fig 1-12 Shell Configuration Modes
22