Accton Technology ES4626 Management Manual page 332

Match acl name: 1
Displayed information
Class map name: c1
Match acl name: 1
13.1.4.1.6
Command: show policy-map [<policy-map-name>]
Function: Display policy map of QoS.
Parameter: < policy-map-name> is the policy map name.
Default: N/A.
Command mode: Admin Mode
Usage Guide: Display all configured policy-map or specified policy-map information.
Example:
Switch # show policy -map
Policy Map p1
Class Map name: c1
police 16000000 2000 exceed-action drop
Displayed information
Policy Map p1
Class map name: c1
police 16000000 8000 exceed-action drop
13.1.4.2 QoS Troubleshooting Help
QoS is disabled on switch ports by default, 8 sending queues are set by default,
queue1 forwards normal packets, other queues are used for some important control
packets (such as BPDU).
When QoS is enabled in Global Mode, QoS is enabled on all ports with 8 traffic
queues. The default CoS value of the port is 0; port is in not Trusted state by default;
the default queue weight values are 1, 2, 3, 4, 5, 6, 7, 8 in order, all QoS Map is using
the default value.
CoS value 7 maps to queue 8 that has the highest priority and usually reserved for
certain protocol packets. It is not recommended for the user to change the mapping
between CoS 7 to Queue 8, or set the default port CoS value to 7.
Explanation
Name of the Class map
Classifying rule for the class map.
show policy-map
332
Explanation
name of policy map
Name of the class map referred to
Policy implemented