Accton Technology ES4626 Management Manual page 313

Global Mode
policy-map <policy-map-name>
no policy-map <policy-map-name>
class <class-map-name>
no class <class-map-name>
set {ip dscp <new-dscp> | ip precedence
<new-precedence>}
no set {ip dscp
precedence <new-precedence>}
police <rate-kbps>
[exceed-action
policed-dscp-transmit}]
no police <rate-kbps>
[exceed-action
policed-dscp-transmit}]
mls qos
<aggregate-policer-name>
<burst-kbyte> exceed-action
|policed-dscp-transmit}
no mls qos
<aggregate-policer-name>
police
<aggregate-policer-name>
no police
<aggregate-policer-name>
4. Apply QoS to ports
Command
Interface Mode
mls qos trust
[pass-through-cos]|ip-precedence
cos]|port priority <cos>]
<new-dscp> |
<burst-kbyte>
{drop
<burst-kbyte>
{drop
aggregate-policer
<rate-kbps>
{drop
aggregate-policer
aggregate
aggregate
[cos [pass-through-dscp]|dscp
[pass-through
313
Create a policy map and enter policy
map mode; the "no policy-map
<policy-map-name>"
deletes the specified policy map.
After a policy map is created, it can be
associated to a class. Different policy
or new DSCP value can be applied to
different data streams in class mode;
the "no class <class-map-name>"
command deletes the specified class.
Assign a new
precedence value for the classified
traffic; the "no
ip
<new-dscp> |
<new-precedence>}"
cancels the newly assigned value.
Configure a policy to classify traffic,
data stream exceeding the limit will be
|
dropped or degraded; the "no police
<rate-kbps>
| [exceed-action
policed-dscp-transmit}]"
deletes the specified policy.
Define a policy set, perform different
actions to out-of-profile data streams,
such as discard or degrade. This
policy can be used in one policy map
by several classes; the "no mls qos
aggregate-policer
<aggregate-policer-name>"
command deletes the specified policy
set.
Apply a policy set to classified traffic;
the "no
police
<aggregate-policer-name>"
command deletes the specified policy
set.
Explanation
Configure port trust; the "no
mls qos trust" command
disables the current trust
command
DSCP and IP
set {ip dscp
ip precedence
command
<burst-kbyte>
{drop |
command
aggregate