Mapping Cos Values To Egress Queue - Accton Technology ES4626 Management Manual

Click Egress-queue WRR weight configuration to entry the configure page.
equivalent to CLI command 13.1.2.2.14.
All sections describe as following:
Port nameWeight for queue 0-7
Operation－Set or Remove
Reset－Will set column as startup defaults. This command will not modify the
configuration.
Apply－Will take effort to all setting. This command will modify the configuration.
To configure the WRR weight should choosing the port name first, then input value for
each queue; select Set for operation, then click Apply.
13.1.5.5.2 Egress-queue Work Mode Configuration
Click Egress-queue work mode configuration to entry the configure page. It is equivalent
to CLI command 13.1.2.2.15.
All sections describe as following:
Port name
Reset－Will set column as startup defaults. This command will not modify the
configuration.
Apply－Will take effort to all setting. This command will modify the configuration.
Default－Will back to startup setting. This command will modify the configuration.
To configure the port as priority-queue mode should choosing port name first, then click
Apply.
13.1.5.5.3

Mapping CoS Values to Egress Queue

341
It is