Show Ip Rip - Accton Technology ES4626 Management Manual

and perform routing troubleshooting according to the output of this command.
Example:
Switch#sh ip protocols
RIP information
rip is turning on
default metrict 16
neighbour is: NULL
preference is 100
rip version information is:
interface send version
vlan2
vlan3
vlan4
Displayed information
RIP is turning on
default metric
neighbour is:
Preference
rip version information
15.3.2.2.21

show ip rip

Command: show ip rip
Function: Display the current running status and configuration information for RIP.
Command mode: Admin Mode
Usage Guide: The user can check the default metric of RIP route, the specified sending
destination address and metric value according to the output of this command.
Example:
Switch#sh ip rip
receive version
V2BC
V2BC
V2BC
382
V12
V12
V12
Explanation
The running routing protocol is RIP.
RIP protocol default metric value.
The neighbor layer3 switch connecting to
this RIP switch.
RIP routing priority.
Display the version information for RIP,
including the RIP version of sending (V1 for
RIP-I, V2 for RIP-II), RIP sending method
(BC for broadcast, MC for multicast), RIP
version of receiving (V1 for RIP-I, V2 for
RIP-II, V12 for both RIP-I and RIP-II).