Show Ip Ospf Ase - Accton Technology ES4626 Management Manual

Command mode: Admin Mode
Example:
Switch#show ip ospf
my router ID is 11.11.4.1
preference=10 ase perference=150
export metric=1
export tag=-2147483648
area ID 0
interface count: 1
80times spf has been run for this area
net range:
LSRefreshTime is1800
area ID 1
interface count: 1
41times spf has been run for this area
net range:
netid11.11.3.255 netaddress11.11.0.0
LSRefreshTime is1800
Displayed information
my router ID
preference
ase perference
export metric
export tag
area ID
interface count
imes spf has been run for this area
net range
15.4.2.2.23

show ip ospf ase

Command: show ip ospf ase
Function: Display exterior OSPF routing information.
Default: Not displayed.
Command mode: Admin Mode
Example:
Switch#show ip ospf ase
Destination AdvRouter NextHop Age SeqNumber
10.1.1.125 11.11.1.2
netmask255.255.252.0
Explanation
The ID of the current layer3 switch.
Routing protocol priority.
Exterior routes priority for introduction.
The metrics for output from the port
The route tag for output from the port.
OSPF area number: including statistics for
interface number in the area, SPF algorithm
calculation time and network scope.
11.1.1.2 3 300
407
Type Cost
2 20