Import External Routing Information; Ospf Priority Configuration - Accton Technology ES4626 Management Manual

15.5.3.3.2 Import
configuration
Click Import external routing information. The configuration page is shown. See the
equivalent CLI command at 15.4.2.2.17.
The explanation of each field is as below:
Imported type – Configure imported route type: Static, RIP, connected，BGP
Type – Specify - Set default imported route type. 1 and 2 stand for Type 1 external route
and Type 2 external route.
Tag – Configure route tag
Metric value – Set route metric value
15.5.3.4 Other OSFP parameter configuration
Click Other parameter configuration. The configuration page is shown.
OSPF priority configuration – Configure OSPF priority
OSPF STUB area and default route cost – Configure OSPF STUB area and default route
cost
OSPF virtual link configuration – Configure OSPF virtual link
Port DR priority configuration – Configure Port DR priority for port election
15.5.3.4.1

OSPF priority configuration

Click OSPF priority configuration. The configuration page is shown. See the equivalent
CLI command at 15.4.2.2.16
The explanation of each field is as below:
ASE – "yes" sets to specify priority for imported external AS route; "no" sets to specify
external routing
443
information