Table of Contents
Advertisement
ip pim bsr-candidate <ifname>
[hashlength] [Priority]
no ip pim bsr-candidate
2)
Command
Interface Mode
ip pim rp-candidate <ifname>
[group-list access-list] [interval
interval]
no ip pim rp-candidate [<ifname>]
3. Disable PIM-SM protocol
Command
Interface Mode
no ip pim sparse-mode
16.4.2.2 PIM-SM Configuration Commands
ip pim sparse-mode
ip pim bsr-border
ip pim hello-interval
ip pim bsr-candidate
ip pim rp-candidate
show ip pim bsr-router
show ip pim interface
show ip pim mroute sm
show ip pim neighbor
show ip pim rp
debug ip pim
debug ip pim bsr
This command is a global candidate BSR
configuration command. It is used to configure
information for PIM-SM candidate BSR and to
comtend for the BSR router with the other
candidate
bsr-candidate" command cancels the BSR
configuration.
Configure a switch as the candidate RP.
Explanation
This command is a global candidate RP
configuration command. It is used to configure
information for PIM-SM candidate RP and to
comtend for the RP router with the other
candidate RPs; the "no ip pim rp-candidate
[<ifname>]"
configuration.
Explanation
Disable PIM-SM protocol
462
BSRs;
the
"no
command
cancels
ip
pim
the
RP
Advertisement
Table of Contents
Troubleshooting
