Igmp Snooping Troubleshooting Help; Web Management; Enable Igmp Snooping On The Switch; Igmp Snooping Configuration - Accton Technology ES4626 Management Manual

processing information can be displayed.
Example: Enable IGMP Snooping debug.
Switch# debug ip igmp snooping

7.4.2 IGMP Snooping Troubleshooting Help

IGMP Snooping function cannot be used with IGMP Query, Snooping is not available
when Query is enabled. The user must make sure whether IGMP Snooping or IGMP
Query is to be enabled.
When IGMP Snooping is used, M-Router port must be specified in the corresponding
VLAN, or the switch cannot perform IGMP Snooping properly.

7.5 Web Management

Click IGMP Snooping configuration. IGMP Snooping configuration and IGMP
Snooping static multicast configuration are shown. On IGMP Snooping configuration page,
users can configure IGMP snooping and query; on IGMP Snooping static multicast
configuration page, users can configure static multicast and IGMP snooping.

7.5.1 Enable IGMP Snooping on the switch

Click Switch basic configuration, Switch on-off configuration. Check "Enabled" box
after IGMP Snooping, and then click Apply. See the equivalent CLI command at 7.2.2.1

7.5.2 IGMP Snooping Configuration

Click IGMP Snooping configuration. The IGMP Snooping configuration page is shown.
The configuration page consists of 3 parts: query configuration, snooping configuration
and IGMP configuration.
7.5.2.1 Query configuration
206