Show Ip Pim Neighbor; Show Ip Pim Interface - Accton Technology ES4626 Management Manual

Displayed information
(5.1.1.100, 225.0.0.1)
Incoming interface
Outgoing interface list
Prune interface list
16.3.4.1.2

show ip pim neighbor

Command: show ip pim neighbor [<ifname>]
Function: Display information for neighbors of the PIM interface.
Parameter: <ifname> is the interface name, i.e. display PIM neighbor information of the
specified interface.
Default: PIM neighbor information is displayed by default on all interfaces.
Command mode: Admin Mode
Usage Guide: If no interface name is specified, then neighbor information for all
interfaces will be displayed.
Example: Display neighbor information for all interfaces (do not specify the interface
name)
Switch#sh ip pim neighbor
Neighbor-Address Interface
2.1.1.1 Vlan1
9.1.1.6 Vlan2
5.1.1.4 Vlan3
Switch#
Displayed information
Neighbor-Address
Interface
ifIndex
Uptime
Expires
DR-state
16.3.4.1.3

show ip pim interface

Command: show ip pim interface [<ifname>]
Explanation
Forwarding entry.
Incoming interface or RPF interface.
Outgoing interface list.
Downstream prune interface list.
ifIndex Uptime Expires DR-state
2005 00: 25: 17 00: 01: 15 /
2006 00: 25: 09 00: 01: 35 DR
2007 00: 25: 01 00: 01: 38 DR
Explanation
Neighbor address
The neighbor interface discovered.
Interface index number
The up time of the neighbor since
discovery.
The remaining time before considering the
neighbor to be invalid.
Whether the neighbor is a DR.
457