Gvrp Configuration Task Sequence - Accton Technology ES4626 Management Manual

and population of such register information to the other switches. Switches support GVRP
can receive VLAN dynamic register information from the other switches, and update local
VLAN register information according the information received. GVRP enabled switch can
also populate their won VLAN register information to the other switches. The VLAN
register information populated includes local static information manually configured and
dynamic information learnt from the other switches. Therefore, by populating the VLAN
register information, VLAN information consistency can be achieved among all GVRP
enabled switches.

5.3.1 GVRP Configuration Task Sequence

1. Configuring GARP Timer Parameters.
2. Enable GVRP function
1. Configuring GARP Timer parameters.
Command
Interface Mode
garp timer join <timer-value>
no garp timer join
garp timer leave <timer-value>
no garp timer leave
garp timer hold <timer-value>
no garp timer hold
Global Mode
garp timer leave all <timer-value>
no garp timer leave all
2. Enable GVRP function
Command
Interface Mode
bridge-ext gvrp
no bridge-ext gvrp
Global Mode
bridge-ext gvrp
no bridge-ext gvrp
Explanation
Configure the hold, join and leave timers
for GARP.
Configure the leave all timer for GARP.
Explanation
Enable the GVRP function on current port.
Enable the GVRP function for the switch.
155